Mining Rig STEP 6

Step by Step Guide

Attach the V2 riser cards to the motherboard and connect your Defi Mining GPU.

To connect the DEFI Mining GPUs to the motherboard through the V2 risers, take the V2 riser and slip it onto the graphics card on the GPU.

Each GPU in the rig must be connected to a different USB-to-V2 slot through a separate riser.

Plug the PCI-e power connectors into one of the GPUs first and complete its setup. You will connect the other connectors to the GPUs once the installations are done using this first GPU.

As you might imagine the Ethernet cable is simply connected to the motherboard. You can also use zip ties to organize your work by bundling cables together.

Organization the GPUs motherboard, and power supply on the DEFI Mining frame is important in case you want to avoid overheating and add more GPUs later on. Ensure to check the guide properly, but also there are multiple online discution you can hook up to and find support according to your GPU models, and mining pools you are connecting to.

--> You can start mining DMT as soon as 1x GPU is active <--

This operation is carried out using the following blend :

(First choosing the model of GPU card you are using) https://neftyblocks.com/collection/defiminingio/blends​

--> Choose your RIG LEVEL + [GPU Model] and Blend

Mining Rig STEP 6

Connecting all other GPUs (6x Max GPUs/RIG)

This is necessary if you are using multiple GPUs, which should also be connected through their respective V2 riser cards attached to the motherboard. Connect the second V2 riser card for the GPU slot closest to the processor and so on ...

NOTE : To keep the mining equipment running stably, you need to use two power supplies from 4x installed GPus (LEVEL 4) with sufficient power to make your rig much efficient.